How to Fix Windows Update When It Fails, Gets Stuck, or Needs to Be Rolled Back

Published 2026-10-16 · Marion Remote Fix

Windows Update is not working — it is stuck at a percentage and will not finish, it fails with an error code, it downloads but will not install, it keeps trying to install the same update and failing, or a recent update broke something and you need to undo it. Update problems are among the most common Windows issues and are caused by corrupted update files, insufficient disk space, conflicting software, or damaged system files. Here is how to fix every common update failure and roll back updates that cause problems.

Run the Windows Update troubleshooter

Start with the built-in troubleshooter that fixes many update issues automatically:

  1. Settings → System → Troubleshoot → Other troubleshooters → Windows Update → Run
  2. The troubleshooter checks for common problems: stopped services, corrupted download cache, incorrect settings, and pending restarts
  3. Apply any fixes it recommends. After the troubleshooter finishes, restart the computer and try Windows Update again
  4. If the troubleshooter says it found issues but could not fix them, note the specific error — it usually points to the next manual step needed

Clear the Windows Update cache

Corrupted downloaded update files are the most common cause of updates failing repeatedly. Clearing the cache forces Windows to download fresh copies:

  1. Open Command Prompt as administrator
  2. Stop the update services: net stop wuauserv then net stop bits then net stop cryptsvc
  3. Delete the update cache: ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
  4. Also rename the catalog cache: ren C:\Windows\System32\catroot2 catroot2.old
  5. Restart the services: net start wuauserv then net start bits then net start cryptsvc
  6. Go to Settings → Windows Update → Check for updates. Windows downloads the updates fresh and attempts to install them again
  7. After confirming updates work, you can delete the old folders (SoftwareDistribution.old and catroot2.old) to reclaim disk space

Fix updates stuck at a percentage

If Windows Update is stuck at a specific percentage (common stuck points: 0%, 20%, 45%, 94%, 100%):

  • Wait at least 2 hours before assuming it is truly stuck. Some updates (especially cumulative and feature updates) are slow, especially on older hardware or HDDs. The progress bar sometimes stays at one percentage for a long time before jumping ahead
  • If stuck during a restart (showing Working on updates, do not turn off your computer): wait at least 3 hours. If still stuck, hold the power button to force a shutdown. On the next boot, Windows should roll back the failed update automatically
  • If stuck in Settings (downloading or installing phase): restart the computer. Check for updates again — the update may continue from where it left off or start over
  • If the same update gets stuck every time: clear the update cache (steps above), then try again. If it still fails, download the update manually from the Microsoft Update Catalog (see the manual installation section below)

Fix common update error codes

Windows Update error codes tell you exactly what went wrong:

  • 0x80070002 or 0x80070003: update files are missing or corrupted. Clear the update cache (steps above) and try again
  • 0x80073712: a system file needed by Windows Update is damaged. Run DISM /Online /Cleanup-Image /RestoreHealth from an elevated Command Prompt, then sfc /scannow, then try the update again
  • 0x800f0922: the computer cannot connect to the update server (check internet and VPN — disconnect VPN while updating) or the System Reserved partition is too small (common on older systems upgraded from Windows 7 or 8)
  • 0x80240034: the update failed to install. Usually fixed by clearing the cache and retrying. If it persists, download the update from the Microsoft Update Catalog
  • 0x80070057: an invalid parameter error, usually caused by corrupted update components. Run the update cache reset steps above, then run DISM and SFC
  • 0x8007000E: out of memory. Close all applications, restart the computer, and try the update immediately before opening other programs

Repair system files that block updates

Damaged Windows system files can prevent updates from installing:

  1. Open Command Prompt as administrator
  2. Run DISM first to repair the component store: DISM /Online /Cleanup-Image /RestoreHealth. This downloads fresh copies of damaged system files from Windows Update servers. It can take 15-30 minutes
  3. After DISM completes, run the system file checker: sfc /scannow. This checks all protected system files and replaces corrupted ones with the copies DISM repaired
  4. If SFC finds and fixes files, restart and try Windows Update again. These two commands together resolve the majority of update installation failures
  5. If DISM itself fails (it needs internet to download repair files), you can use a Windows installation ISO as the repair source: DISM /Online /Cleanup-Image /RestoreHealth /Source:D:\Sources\install.wim (replace D: with the drive letter of the mounted ISO)

Free up disk space for updates

Windows needs free disk space to download and install updates. Feature updates can need 20 GB or more of free space:

  1. Check available space: open File Explorer → This PC. If your C: drive has less than 10 GB free, updates may fail
  2. Run Disk Cleanup: search for Disk Cleanup in Start → select C: → check all boxes including Windows Update Cleanup, Temporary files, and Delivery Optimization Files → OK → Delete Files
  3. In Settings → System → Storage → Temporary files, you can see what is using space and delete temporary files, previous Windows installations, and other cleanup candidates
  4. If you cannot free enough space on C:, you can use an external USB drive for feature updates: during the update process, Windows offers to use an external drive for temporary files

Install updates manually from the Microsoft Update Catalog

If a specific update consistently fails through Windows Update, installing it manually often works:

  1. Note the KB number from the failed update (shown in Settings → Windows Update → Update history as KBXXXXXXX)
  2. Go to catalog.update.microsoft.com in your browser
  3. Search for the KB number. Find the version matching your system (x64 for 64-bit Windows, which is most modern computers)
  4. Download the .msu file and run it. The standalone installer bypasses the Windows Update service and installs the update directly
  5. Restart after installation. Check Windows Update to see if it now shows the update as installed

Roll back a problematic update

If a recent update caused problems (blue screens, broken features, driver issues, performance problems):

  1. Settings → Windows Update → Update history → Uninstall updates
  2. Find the update that caused problems (sort by Install date to find the most recent ones)
  3. Click Uninstall next to the problematic update. Restart when prompted
  4. After uninstalling, you can temporarily pause updates: Settings → Windows Update → Pause updates. This gives you time until a fixed version is released
  5. For feature updates (like upgrading from Windows 10 to 11 or major Windows 11 version upgrades): Settings → System → Recovery → Go back. This option is available for 10 days after a feature update. It reverts to your previous Windows version
  6. If you cannot boot into Windows after a bad update: restart the computer three times during the boot process to trigger Automatic Repair → Advanced options → Uninstall updates. You can uninstall the latest quality update or feature update from here

Prevent a specific update from reinstalling

After uninstalling a problematic update, Windows may try to reinstall it automatically:

  • Microsoft provides a tool called Show or hide updates (wushowhide.diagcab) that lets you block specific updates from installing. Download it from Microsoft's support site, run it, and select the update to hide
  • On Windows 11 Pro and Enterprise, you can also use Group Policy: Computer Configuration → Administrative Templates → Windows Components → Windows Update → Manage updates offered from Windows Update to control which updates install
  • Pausing updates (Settings → Windows Update → Pause) is a temporary measure that works on all editions but only delays updates for a limited time

Remote update troubleshooting

If Windows Update is still failing or you need help rolling back a problematic update, Marion Remote Fix can assist remotely — diagnosing update errors, repairing system files, clearing caches, and managing problematic updates through a secure remote session.

← Back to Blog