How to Upgrade from Windows 10 to Windows 11 Safely
Published 2026-10-15 · Marion Remote Fix
Windows 10 support ends in October 2025, and upgrading to Windows 11 keeps your computer secure with continued updates. The upgrade is free if your computer meets the hardware requirements. However, not every computer can run Windows 11, and the upgrade process can fail if you are not prepared. Here is how to check compatibility, prepare your system, upgrade safely, and fix common problems along the way.
Check if your computer is compatible
Windows 11 has stricter hardware requirements than Windows 10. Many computers from before 2018 do not qualify:
- Download and run the PC Health Check app from Microsoft. It tells you whether your computer meets Windows 11 requirements and identifies which specific requirements are not met
- The key requirements are: a compatible 64-bit processor (Intel 8th gen or newer, AMD Ryzen 2000 series or newer), 4 GB RAM minimum, 64 GB storage minimum, TPM 2.0 (Trusted Platform Module), Secure Boot capable, and UEFI firmware
- The two most common blockers are TPM 2.0 and Secure Boot. Many computers have these features but they are disabled in the BIOS. Check the troubleshooting sections below if PC Health Check says these are missing
- If your processor is not supported, there is no official way to upgrade. Microsoft allows manual installation on unsupported hardware using an ISO, but the computer will not receive all updates and Microsoft explicitly says it may not be reliable
Enable TPM 2.0
TPM is a security chip on your motherboard. Most computers from 2016 onward have one, but it may be turned off:
- Press Win+R → type
tpm.msc→ press Enter. This opens the TPM Management console - If it says Compatible TPM cannot be found, the TPM is either disabled or not present
- If it shows TPM Manufacturer Information with Specification Version 2.0, you already have it enabled — skip to the next section
- To enable it, restart your computer and enter the BIOS/UEFI setup (press Del, F2, F10, or F12 during boot — the key varies by manufacturer)
- Look for TPM settings — they are in different locations depending on the manufacturer: Security → TPM, Security → Trusted Computing, Advanced → Trusted Computing. Intel systems may call it Intel Platform Trust Technology (PTT). AMD systems may call it AMD fTPM
- Enable it, save BIOS settings, and restart. Run tpm.msc again to verify it shows version 2.0
Enable Secure Boot
Secure Boot prevents unauthorized software from loading during startup. Windows 11 requires it:
- Check current status: press Win+R → type
msinfo32→ press Enter. Look for Secure Boot State — it should say On - Also check BIOS Mode in the same window — it should say UEFI, not Legacy. If it says Legacy, your disk may be formatted as MBR instead of GPT, which is a more complex fix (see the disk conversion section below)
- To enable Secure Boot, restart into BIOS setup → find Secure Boot (usually under Boot, Security, or Authentication) → set it to Enabled
- If the Secure Boot option is grayed out, you may need to set an Administrator Password or Supervisor Password in the BIOS first. Some BIOS versions require a password before allowing Secure Boot changes
- Save and restart. Check msinfo32 again to confirm Secure Boot State is On
Convert MBR disk to GPT if needed
If your BIOS Mode shows Legacy instead of UEFI, your system disk is likely using the older MBR partition style. Windows 11 requires GPT:
- You can convert MBR to GPT without losing data using the built-in tool. Open Command Prompt as administrator
- Run
mbr2gpt /validate /disk:0to check if the disk can be converted. If it says Validation completed successfully, proceed - Run
mbr2gpt /convert /disk:0to perform the conversion. This preserves all your data and partitions - After conversion, restart into BIOS and change the Boot Mode from Legacy to UEFI. Then enable Secure Boot
- If the conversion fails validation, your disk layout may need adjustment. Do not attempt the conversion without first backing up your data
Back up your data before upgrading
The upgrade should preserve your files, apps, and settings, but problems can occur. Always back up before a major upgrade:
- Copy important files (documents, photos, downloads, desktop files) to an external drive or cloud storage
- Export browser bookmarks if you have not synced them to an account
- Note any software license keys you may need to reactivate after the upgrade — especially for software that uses hardware-based activation
- If you use specialized software (accounting, CAD, medical), check the developer's website to confirm it supports Windows 11 before upgrading
- Consider creating a full system image backup using Windows Backup or a third-party tool. This lets you restore the entire system to its current state if the upgrade fails badly
Upgrade through Windows Update
The simplest upgrade method — Windows Update handles everything:
- Settings → Windows Update → Check for updates
- If your computer is eligible, you will see Upgrade to Windows 11 is ready — and it is free. Click Download and install
- The download size is approximately 3.5 to 5 GB depending on your current Windows 10 version
- The installation runs in the background while you continue using your computer. When it is ready, you will be asked to restart. The restart and installation process takes 20 to 60 minutes depending on your hardware
- If the Windows 11 upgrade does not appear in Windows Update, your computer may not meet requirements, or Microsoft may not have offered it to your specific hardware yet. Use the Installation Assistant instead (next section)
Upgrade using the Installation Assistant
If Windows Update does not show the upgrade option but your computer is compatible:
- Search for Windows 11 Installation Assistant on Microsoft's website and download it
- Run the assistant. It checks compatibility, downloads Windows 11, and installs it
- Your files, apps, and settings are preserved — this is an in-place upgrade, not a clean install
- The assistant requires at least 9 GB of free disk space for the download and installation files
- Do not shut down or restart the computer during installation. If the computer loses power, the installation may fail and require repair
Fix common upgrade errors
If the upgrade fails, these are the most common problems and solutions:
- Not enough disk space: free up space by running Disk Cleanup (search for it in Start), emptying the Recycle Bin, moving large files to an external drive, or uninstalling programs you no longer use. The upgrade needs at least 64 GB total on the system drive, with 9 GB or more free
- Incompatible software: some programs block the upgrade. The installer will name them. Uninstall the incompatible programs before upgrading — you can reinstall updated versions after
- Driver issues: outdated drivers (especially display, storage, and network) can cause the upgrade to fail. Update all drivers through Device Manager or your manufacturer's support page before trying again
- Error code 0x800f0922: usually means the System Reserved partition is too small. This requires expanding the partition — a more advanced fix
- Error code 0xC1900101: a driver-related installation failure. Update all drivers, disconnect unnecessary USB devices, and temporarily disable antivirus before retrying
- Upgrade stuck at a percentage: wait at least 2 to 3 hours before assuming it is stuck. If it is truly frozen, hold the power button to force a shutdown. On the next boot, Windows should roll back to Windows 10 automatically
What changes in Windows 11
After upgrading, here are the key differences to be aware of:
- The Start menu is centered on the taskbar instead of the left side. You can move it back to the left: right-click the taskbar → Taskbar settings → Taskbar behaviors → Taskbar alignment → Left
- Right-click context menus show fewer options by default — click Show more options at the bottom to see the full menu you are used to from Windows 10
- Drag and drop onto the taskbar was removed initially but has been restored in later Windows 11 updates. Make sure you install all updates after upgrading
- Some Control Panel features have moved to the Settings app. If you cannot find a setting in Control Panel, search for it in Settings
- The Widgets panel (accessible from the taskbar) shows news and weather. If you find it distracting, right-click the taskbar → Taskbar settings → turn off Widgets
Roll back to Windows 10 if needed
If Windows 11 causes problems, you can go back to Windows 10 within 10 days of upgrading:
- Settings → System → Recovery → Go back (under Recovery options)
- Follow the prompts. Windows will restore your previous Windows 10 installation with all your files and settings intact
- After 10 days, the Go back option disappears and the old Windows 10 files are deleted to free up space. If you think you might want to go back, do it within the 10-day window
- You can extend the rollback window before it expires by opening Command Prompt as administrator and running
DISM /Online /Set-OSUninstallWindow /Value:60— this extends it to 60 days
Remote upgrade assistance
If you need help upgrading to Windows 11 or ran into errors during the upgrade, Marion Remote Fix can assist remotely — checking compatibility, enabling TPM and Secure Boot, resolving upgrade errors, and configuring Windows 11 settings through a secure remote session.