How to Fix a Printer Queue That Is Stuck and Will Not Clear

Published 2026-10-16 · Marion Remote Fix

You send a document to the printer and it does not print. You try to cancel the job but it stays in the queue showing "Deleting" or "Error" forever. New print jobs pile up behind it and nothing prints. This is a stuck print queue, and it is caused by the Windows Print Spooler service holding onto a corrupted or incomplete print job that it cannot process or remove. Here is how to clear it.

The quick fix: restart the Print Spooler

This clears the queue and resolves most stuck print jobs in under a minute:

  1. Press Win+R → type services.msc → Enter
  2. Find Print Spooler in the list → right-click → Stop
  3. Open File Explorer → navigate to C:\Windows\System32\spool\PRINTERS
  4. Delete everything inside the PRINTERS folder. These are the cached print jobs that are stuck. If you get an "Access denied" error, make sure the Print Spooler service is fully stopped
  5. Go back to Services → right-click Print Spooler → Start
  6. Try printing again. The queue should be empty and new jobs should process normally

Clear the queue from Command Prompt

If you prefer a command-line approach or need to do this frequently:

  1. Open Command Prompt as Administrator
  2. Run these commands in order:
  • net stop spooler
  • del /Q /F /S "%systemroot%\System32\spool\PRINTERS\*.*"
  • net start spooler
  1. This stops the spooler, deletes all queued print files, and restarts the spooler in three quick commands

Cancel individual stuck jobs

If you want to remove specific jobs without clearing the entire queue:

  1. Open Settings → Bluetooth and devices → Printers and scanners → click your printer → Open print queue
  2. Right-click the stuck job → Cancel
  3. If Cancel does not work (the job shows "Deleting" indefinitely), the spooler is hung on that job. Use the full spooler restart method above
  4. To cancel all jobs at once: in the print queue window, click Printer menu → Cancel All Documents

Fix the Print Spooler service

If the Print Spooler service itself is not running or keeps crashing:

  1. Open Services (Win+R → services.msc)
  2. Find Print Spooler → double-click to open Properties
  3. Set Startup type to Automatic
  4. If the service is stopped, click Start
  5. On the Recovery tab, set First failure, Second failure, and Subsequent failures all to "Restart the Service." This ensures the spooler auto-restarts if it crashes
  6. Click Apply → OK

If the Print Spooler will not start or crashes immediately after starting, there may be a corrupted printer driver (see below).

Fix printer showing Offline

If the printer shows as "Offline" in the queue and jobs pile up without printing:

  1. Open Settings → Bluetooth and devices → Printers and scanners → click your printer
  2. Click Open print queue → click Printer menu → uncheck "Use Printer Offline" if it is checked
  3. Check the physical connection: USB cable, network/Wi-Fi connection, and that the printer is powered on and not showing an error on its display
  4. For network printers: make sure the printer and computer are on the same network. Try pinging the printer's IP address from Command Prompt: ping 192.168.1.x (replace with your printer's IP, which you can find on the printer's network settings page or by printing a configuration page from the printer's menu)

Reinstall the printer driver

Corrupted printer drivers can cause jobs to get stuck, fail silently, or crash the spooler:

  1. Open Settings → Bluetooth and devices → Printers and scanners → click your printer → Remove
  2. Open Device Manager → expand Print queues → right-click your printer → Uninstall device → check "Delete the driver software"
  3. Restart the computer
  4. Reinstall the printer: for USB printers, plug the cable back in and let Windows detect it. For network printers, add it through Settings → Printers and scanners → Add a printer
  5. If Windows installs a generic driver that does not work properly, download the full driver package from your printer manufacturer's website (HP, Canon, Epson, Brother, Lexmark)

Remove old or ghost printers

Old printer entries left over from printers you no longer use can interfere with the print system:

  1. Open Settings → Bluetooth and devices → Printers and scanners
  2. Remove any printers you no longer use
  3. Also open Print Management (search for "Print Management" in the Start menu — available on Windows Pro). Under Print Servers → your computer → Drivers, remove drivers for printers you no longer have. Old drivers can conflict with new ones

Fix WSD port issues

Windows uses WSD (Web Services for Devices) to discover network printers. WSD connections can be unreliable and cause intermittent queue failures:

  1. Check your printer's port: Settings → Printers and scanners → click your printer → Printer properties → Ports tab
  2. If the printer is using a WSD port, consider switching to a Standard TCP/IP port for more reliable printing
  3. Click Add Port → Standard TCP/IP Port → enter the printer's IP address
  4. Select the new TCP/IP port and click Apply. TCP/IP ports are more stable than WSD for network printing

Run the printer troubleshooter

Windows has a built-in printer troubleshooter:

  • Windows 11: Settings → System → Troubleshoot → Other troubleshooters → Printer → Run
  • Windows 10: Settings → Update and Security → Troubleshoot → Additional troubleshooters → Printer

The troubleshooter checks the spooler service, driver status, port configuration, and network connectivity. It can fix common issues automatically.

System file repair

If the Print Spooler keeps crashing or the queue repeatedly gets stuck after clearing:

  1. Open Command Prompt as Administrator
  2. Run sfc /scannow to repair corrupted system files
  3. If SFC cannot repair, run DISM /Online /Cleanup-Image /RestoreHealth first, then SFC again
  4. Restart and test printing

Remote printer troubleshooting

If your print queue keeps getting stuck and the fixes above have not resolved it, Marion Remote Fix can diagnose the issue remotely — clearing stuck jobs, repairing the spooler service, reinstalling printer drivers, and reconfiguring printer ports through a secure remote session.

← Back to Blog