How to Fix a Printer That Shows Offline, Will Not Print, or Has Driver Errors

Published 2026-10-16 · Marion Remote Fix

Your printer shows as Offline in Windows even though it is turned on and connected, print jobs sit in the queue and never print, or you get a Driver is unavailable error when you try to print. Printer problems on Windows are caused by stalled print spooler services, wrong default printer settings, outdated or missing drivers, or network and USB connection issues. This guide covers every common printer problem from offline status to driver errors.

Check the basics first

Before diving into software fixes, verify the physical setup:

  • Make sure the printer is powered on and not showing any error lights or messages on its display panel. Paper jams, empty ink cartridges, and open covers all cause the printer to stop responding
  • For USB printers: check that the USB cable is firmly connected at both ends. Try a different USB port on your computer. Try a different USB cable if available — cables do fail
  • For network printers (Wi-Fi or Ethernet): make sure the printer is connected to the same network as your computer. Print a network configuration page from the printer itself (usually through the printer's menu → Network Settings → Print Network Config) to verify it has an IP address on your network
  • For Wi-Fi printers: if the printer recently lost its Wi-Fi connection (after a router restart, password change, or power outage), you may need to reconnect it to Wi-Fi through the printer's setup menu

Set the printer online in Windows

Windows sometimes marks a printer as offline and does not automatically bring it back:

  1. Open Settings → Bluetooth and devices → Printers and scanners (Windows 11) or Settings → Devices → Printers and scanners (Windows 10)
  2. Click your printer → Open print queue
  3. In the print queue window, click Printer in the menu bar. If Use Printer Offline is checked, uncheck it. This tells Windows to try sending jobs to the printer again
  4. If there are stuck print jobs in the queue, select them all and delete them. Stuck jobs can block everything behind them
  5. Try printing a test page: go back to the printer's settings page → Print a test page

Restart the print spooler service

The print spooler is the Windows service that manages all print jobs. When it stalls or crashes, nothing prints and printers appear offline:

  1. Press Win+R → type services.msc → press Enter
  2. Scroll down to Print Spooler → right-click it → Restart. If Restart is grayed out, click Start
  3. If the spooler keeps crashing immediately after starting, stale print jobs may be corrupting it. Stop the spooler, then open File Explorer and navigate to C:\Windows\System32\spool\PRINTERS. Delete all files in this folder (these are the pending print jobs). Then start the spooler again
  4. From Command Prompt as administrator, you can do this in one sequence: net stop spooler then del /f /q %SystemRoot%\System32\spool\PRINTERS\* then net start spooler
  5. After restarting the spooler, try printing again. If the spooler keeps crashing, a corrupted driver is usually the cause — see the driver sections below

Set the correct default printer

If you have multiple printers installed and print jobs go to the wrong one or Windows keeps switching your default:

  1. Settings → Bluetooth and devices → Printers and scanners
  2. Turn off Let Windows manage my default printer at the bottom. When this is on, Windows changes your default to whichever printer you used last, which can be confusing
  3. Click the printer you want as default → Set as default
  4. If you see printers listed that no longer exist (old network printers, printers from previous locations), remove them to reduce confusion: click the printer → Remove

Fix Driver is unavailable error

If your printer shows Driver is unavailable under its name in Settings, Windows cannot communicate with the printer because the driver is missing, corrupted, or incompatible:

  1. Windows Update drivers: Settings → Windows Update → Check for updates → Advanced options → Optional updates. Printer driver updates often appear here. Install any available printer drivers and restart
  2. Manufacturer's driver: go to your printer manufacturer's website (HP, Canon, Epson, Brother, etc.) → Support → enter your printer model → download the latest driver for your Windows version. Run the installer and follow the prompts
  3. Remove and reinstall: if updating does not work, remove the printer completely first. Settings → Printers and scanners → click the printer → Remove. Then open Device Manager → expand Print queues → right-click the printer → Uninstall device → check Delete the driver software. Restart the computer, then install the fresh driver from the manufacturer
  4. Clean driver removal: for stubborn driver problems, open Print Management (search for it in Start, available on Pro editions) → Custom Filters → All Drivers. Find your printer's driver, right-click → Remove Driver Package. Then reinstall from scratch
  5. After installing the driver, the printer should appear in Settings → Printers and scanners without the unavailable message. Print a test page to confirm

Fix network printer offline issues

Network printers (connected via Wi-Fi or Ethernet) have additional points of failure:

  1. Check the printer's IP address: network printers sometimes get a new IP address from DHCP after a power cycle. If Windows has the old IP saved, it cannot reach the printer. Print a network config page from the printer to find its current IP
  2. Ping the printer: open Command Prompt → ping 192.168.1.X (replace with the printer's IP). If you get replies, the network connection is fine. If you get Request timed out, the printer is not reachable on the network
  3. Re-add with the correct IP: if the IP changed, remove the printer from Windows and add it again: Settings → Printers and scanners → Add device. If the printer is not discovered automatically, click Add manually → Add a printer using a TCP/IP address → enter the new IP address
  4. Assign a static IP: to prevent the IP from changing again, log into the printer's web interface (type the printer's IP address in a web browser) and set a static IP in its network settings. Choose an IP outside your router's DHCP range
  5. Firewall blocking: if you recently installed or updated security software, it may be blocking the printer ports. Printer communication uses ports 9100 (raw printing), 515 (LPR), and 631 (IPP). Check your firewall settings for blocks on these ports

Fix USB printer not recognized

If a USB printer is not detected at all when you plug it in:

  • Try a different USB port, preferably directly on the computer rather than through a hub
  • Check Device Manager → look under Other devices or Universal Serial Bus controllers for any devices with yellow warning triangles. If the printer appears there, right-click → Update driver
  • Some printers need their driver installed BEFORE connecting the USB cable. Check the manufacturer's instructions — if they say to install software first, unplug the printer, run the installer, and plug in the printer only when the installer prompts you to
  • Try the printer on another computer. If it works there, the issue is driver or port related on your machine. If it does not work on any computer, the printer's USB port may be faulty

Run the Windows printer troubleshooter

Windows includes an automated troubleshooter that fixes many common printer problems:

  1. Settings → System → Troubleshoot → Other troubleshooters → Printer → Run
  2. The troubleshooter checks the spooler service, driver status, default printer configuration, and network connectivity
  3. Follow any recommendations it provides. It can automatically restart the spooler, clear stuck jobs, and reinstall drivers
  4. If the troubleshooter finds the issue but cannot fix it, the description it provides usually points you to the specific manual fix needed

Fix printer problems after a Windows Update

Windows Updates occasionally break printer functionality, especially for older printers:

  • If your printer stopped working right after a Windows Update, check if the update replaced your printer driver with a generic one. Go to Device Manager → Print queues → right-click the printer → Properties → Driver tab. If the driver name changed to a generic Microsoft driver, reinstall the manufacturer's driver
  • You can uninstall the recent update to test: Settings → Windows Update → Update history → Uninstall updates → uninstall the most recent update. If the printer works again, the update was the cause — wait for a fixed version before updating again or reinstall the manufacturer's driver which usually resolves the compatibility issue
  • Check the manufacturer's website for a driver update released after the Windows Update — major printer brands usually release compatibility fixes within a few weeks

Remote printer troubleshooting

If your printer is still offline, showing driver errors, or refusing to print after trying these steps, Marion Remote Fix can diagnose the problem remotely — checking spooler configuration, reinstalling drivers, and resolving network printer issues through a secure remote session.

← Back to Blog