How to Fix Echo and Audio Feedback During Zoom Calls
Published 2026-10-16 · Marion Remote Fix
Audio echo during a Zoom call means that sound from your speakers is being picked up by your microphone and sent back to the other participants, who then hear a delayed copy of their own voice. The echo can also loop — each side picks up the other's echo, creating escalating feedback. This is almost always caused by the speaker and microphone being too close together without proper echo cancellation, but driver issues and incorrect settings can make it worse.
Use headphones
The single most effective fix for echo is to use headphones or earbuds. When audio plays through headphones instead of speakers, the microphone cannot pick up the other person's voice. This eliminates the echo loop entirely:
- Any headphones work — wired earbuds, over-ear headphones, or a USB headset with a built-in microphone
- If you must use speakers, move the microphone as far from the speakers as possible and lower the speaker volume. The quieter the speakers, the less the microphone picks up
Check Zoom audio settings
Zoom has built-in echo cancellation that handles most situations, but it can be misconfigured:
- In Zoom, click the arrow next to the microphone icon and select Audio Settings
- Under Microphone, check Automatically adjust microphone volume. If this is off and the mic level is set too high, it will pick up more ambient sound including speaker output
- Under Speaker, lower the volume to 60-70% if you are not using headphones
- Click Advanced at the bottom of the Audio settings
- Set Echo cancellation to Auto (or Aggressive if echo persists). The Auto setting works in most environments
- Set Suppress background noise to Medium or High. While this is designed for background noise, it also helps suppress speaker bleed
Disable "Listen to this device" in Windows
Windows has a monitoring feature that plays your microphone input back through your speakers in real-time. If this is enabled, it creates an immediate echo loop:
- Right-click the speaker icon in the system tray and select Sound settings
- Click More sound settings (Windows 11) or scroll down to Sound Control Panel
- Go to the Recording tab
- Double-click your microphone
- Go to the Listen tab
- Make sure Listen to this device is unchecked
- Click Apply, then OK
This setting is the most commonly overlooked cause of echo. It is sometimes enabled by audio software or driver installers without the user knowing.
Reduce microphone boost
Microphone boost amplifies the input signal, which is useful for quiet mics but also amplifies speaker bleed:
- In the same Sound Control Panel, go to the Recording tab
- Double-click your microphone, then go to the Levels tab
- Set Microphone level to 80-90%
- Set Microphone Boost to 0 dB or +10 dB at most. Higher boost values (+20 or +30 dB) will pick up everything in the room including your speakers
- Click Apply
Check for multiple audio sources
Echo can occur when Zoom is using one microphone but Windows is monitoring another, or when multiple devices are active:
- In Zoom audio settings, explicitly select your microphone and speaker rather than leaving them on System Default. The default can change unexpectedly when you plug in or unplug devices
- If you have both a built-in laptop microphone and an external mic, disable the one you are not using: Sound settings → Recording tab → right-click the unused mic → Disable
- If you connected a Bluetooth headset but Zoom is still using the laptop speakers, the Bluetooth device may not be set as the default communication device. Right-click it in the Recording and Playback tabs and select Set as Default Communication Device
Fix Bluetooth audio echo
Bluetooth headsets and earbuds can introduce echo due to codec switching:
- When a Bluetooth device is used for both audio output and microphone input, Windows switches from the A2DP (high-quality stereo) codec to the HFP/HSP (hands-free) codec. HFP has lower audio quality and can introduce latency that causes echo
- In Zoom audio settings, if you see two entries for your Bluetooth device (one for speakers, one for hands-free), select the hands-free version for both speaker and microphone
- If echo persists with Bluetooth, test with a wired connection to determine if Bluetooth is the cause
Update audio drivers
Outdated or generic audio drivers can have poor echo cancellation support:
- Open Device Manager (Windows+X → Device Manager)
- Expand Sound, video and game controllers
- Right-click your audio device and select Update driver → Search automatically
- If Windows finds no update, visit the manufacturer's website (Realtek, Intel SST, or your laptop manufacturer's support page) for the latest driver
- After installing, restart and test a Zoom call
Test with Zoom's audio test
Zoom has a built-in audio test that does not require another person:
- In Zoom audio settings, click Test Speaker — you should hear a ringtone through your selected output device
- Click Test Mic — speak for a few seconds, then Zoom plays back your recording. If the playback includes echo or hollow room sound, the issue is on your end
- If the test sounds clean but live calls have echo, the other participant may be the one causing the echo. Ask them to mute briefly — if the echo stops when they mute, the problem is their setup, not yours
Room acoustics
In rooms with hard surfaces (bare walls, glass, tile), sound bounces off surfaces and reaches the microphone as a room echo distinct from the speaker-to-mic loop:
- Use a directional microphone or headset mic positioned close to your mouth rather than a laptop mic that picks up the whole room
- Even a soft surface near the microphone (a mousepad, a book standing upright) can reduce reflections
- Close doors and windows to reduce ambient noise that forces you to increase speaker volume
Remote audio troubleshooting
If Zoom echo persists after adjusting settings, Marion Remote Fix can diagnose the issue remotely — checking audio device configuration, driver versions, Windows sound settings, and Zoom preferences through a secure remote session.