How to Fix a Computer That Keeps Dropping the Wi-Fi Connection
Published 2026-10-16 · Marion Remote Fix
An intermittent Wi-Fi connection that drops every few minutes and then reconnects is different from a dead Wi-Fi adapter or a weak signal. The adapter works — it connects, transfers data, then disconnects without warning. The Windows notification area may briefly show "No internet" before reconnecting automatically, or you may have to manually reconnect each time. This is usually caused by power management settings, driver issues, or network configuration rather than a hardware fault.
Disable Wi-Fi power management
Windows aggressively power-manages wireless adapters to save battery. On desktops this serves no purpose, and on laptops it frequently causes drops:
- Press Windows+X and select Device Manager
- Expand Network adapters
- Right-click your Wi-Fi adapter and select Properties
- Go to the Power Management tab
- Uncheck Allow the computer to turn off this device to save power
- Click OK
Also change the power plan wireless setting:
- Open Control Panel → Power Options
- Click Change plan settings next to your active plan
- Click Change advanced power settings
- Expand Wireless Adapter Settings → Power Saving Mode
- Set both On battery and Plugged in to Maximum Performance
- Click Apply
Update the Wi-Fi driver
Outdated or generic drivers are the most common cause of intermittent Wi-Fi drops. The generic driver Windows installs may lack features that the adapter needs for stable operation:
- In Device Manager, right-click the Wi-Fi adapter and select Properties → Driver tab. Note the driver version and date
- Visit the adapter manufacturer's website (Intel, Realtek, Qualcomm/Atheros, MediaTek) or your laptop manufacturer's support page
- Download the latest driver for your specific adapter model. For Intel adapters, use the Intel Driver and Support Assistant
- Install and restart
If the new driver makes things worse, roll back: Device Manager → right-click adapter → Properties → Driver → Roll Back Driver.
Change the wireless adapter advanced settings
The adapter's advanced properties can affect connection stability:
- In Device Manager, right-click the Wi-Fi adapter → Properties → Advanced tab
- Roaming Aggressiveness: set to Highest. A low setting means the adapter holds onto a weak signal instead of switching to a stronger one, causing perceived drops as throughput degrades
- Preferred Band: if you have a dual-band router, set to Prefer 5 GHz. The 5 GHz band has less interference from neighbors and household devices
- 802.11n/ac/ax Channel Width: try setting to 20 MHz only. Wider channels (40/80/160 MHz) offer higher speeds but are more susceptible to interference. If drops stop with 20 MHz, interference is the cause
- Throughput Booster / Packet Burst: disable if present. These features can cause instability with some routers
Flush DNS and reset the network stack
Corrupted DNS cache or Winsock catalog entries can cause connection-present-but-no-internet drops:
- Open Command Prompt as Administrator
- Run these commands in order:
ipconfig /flushdnsipconfig /releaseipconfig /renewnetsh winsock resetnetsh int ip reset
- Restart the computer
Forget and reconnect to the network
A corrupted saved Wi-Fi profile can cause authentication failures that look like drops:
- Open Settings → Network and Internet → Wi-Fi → Manage known networks
- Find your network and click Forget
- Reconnect by selecting the network from the available list and entering the password
- Windows creates a fresh profile with current authentication settings
Use a static DNS server
If the Wi-Fi connection stays active but internet access drops intermittently, the router's DNS may be unreliable:
- Open Settings → Network and Internet → Wi-Fi → your network → Hardware properties → Edit (next to DNS server assignment)
- Switch from Automatic to Manual
- Set the preferred DNS to
8.8.8.8(Google) or1.1.1.1(Cloudflare) - Set the alternate to
8.8.4.4or1.0.0.1 - Save and test
Check for interference
- Microwave ovens, baby monitors, cordless phones, and Bluetooth devices all operate near the 2.4 GHz band and can cause drops when they are active
- If your router is on 2.4 GHz and you have neighbors with many Wi-Fi networks visible, channel congestion may cause drops. Log into your router and switch to a less crowded channel (1, 6, or 11 on 2.4 GHz — these are the only non-overlapping channels)
- Move the router away from walls, metal objects, and other electronics. Even a 1-meter shift can significantly improve signal quality
Disable Wi-Fi Sense and Hotspot 2.0
Older Windows 10 versions had Wi-Fi Sense, which automatically connected to open hotspots and could cause unexpected drops. On current Windows versions:
- Go to Settings → Network and Internet → Wi-Fi
- Turn off Connect to suggested open hotspots
- Turn off Hotspot 2.0 networks (this can cause the adapter to attempt connections to enterprise networks in the background)
Check the router and modem
- If multiple devices drop Wi-Fi at the same time, the problem is the router, not your computer. Restart the router (unplug for 30 seconds, plug back in)
- Check your router's firmware version — manufacturer sites often have firmware updates that fix Wi-Fi stability bugs
- If the router is more than 5-6 years old, it may not properly support modern Wi-Fi 6 adapters. Older routers can mishandle 802.11ax negotiation, causing the adapter to fall back and reconnect repeatedly
Remote Wi-Fi troubleshooting
If your Wi-Fi keeps dropping after trying the fixes above, Marion Remote Fix can diagnose the issue remotely — checking driver versions, power management settings, adapter configuration, DNS resolution, and network stack health through a secure remote session.