How to Fix System Restore When It Fails on Windows

Published 2026-10-16 · Marion Remote Fix

System Restore failed with an error message and did not restore your computer to the selected restore point. You may see errors like System Restore Did Not Complete Successfully, System Restore Failed to Extract the File, an unspecified error occurred, or a specific error code. System Restore failures are frustrating because you typically run System Restore when something else is already broken, and having the recovery tool fail compounds the problem. Most failures are caused by antivirus interference, corrupted restore points, insufficient disk space, or disabled system protection.

Common System Restore error codes

  • Error 0x80070091 indicates a directory is not empty — a file or folder at the restore target cannot be overwritten. Error 0x80070005 is an access denied error meaning System Restore cannot modify certain files. Error 0x8000FFFF is an unspecified error that often relates to corrupted system components
  • Error 0x80042302 means the Volume Shadow Copy service encountered a problem. System Restore depends on Volume Shadow Copy to create and restore snapshots. If the service is stopped or corrupted, all restore operations fail
  • Note the specific error code from your failure message. The code narrows down which fix to apply. If no code is shown, try the general fixes below in order

Run System Restore in Safe Mode

  • Safe Mode disables third-party drivers and services that may interfere with System Restore. Restart the computer, hold Shift while clicking Restart on the power menu, then navigate to Troubleshoot, Advanced Options, Startup Settings, Restart. Press 4 for Safe Mode
  • In Safe Mode, search for System Restore in the Start menu or go to Control Panel, Recovery, Open System Restore. Select the same restore point and run the restore. Without third-party software interfering, the restore is more likely to succeed
  • If Safe Mode is not available because Windows does not boot, access System Restore from the Windows Recovery Environment. Force-interrupt the boot three times to trigger Automatic Repair, then go to Advanced Options, System Restore

Temporarily disable antivirus

  • Antivirus software actively protects files from modification, which can block System Restore from replacing files. Even during a restore operation, the antivirus may prevent changes to files it considers protected. This causes the access denied errors or unspecified errors
  • Disable your antivirus completely before running System Restore. For Windows Security (Defender), open it and turn off Real-Time Protection. For third-party antivirus, find the disable or pause protection option in its system tray menu. Run System Restore, then re-enable protection after the restore completes
  • If disabling the antivirus in Windows does not help, try Safe Mode instead — Safe Mode prevents third-party antivirus from loading at all, which is more thorough than just disabling it

Check and start required services

  • System Restore requires several services to be running. Press Windows plus R, type services.msc, and check: Volume Shadow Copy (should be set to Manual), Microsoft Software Shadow Copy Provider (should be set to Manual), Windows Backup (should be set to Manual), Task Scheduler (should be set to Automatic)
  • If Volume Shadow Copy is stopped, right-click it and select Start. If it fails to start, check the Log On tab — it should run as Local System Account. A changed Log On account prevents the service from starting
  • If the Task Scheduler service is stopped or disabled, System Restore cannot schedule or execute restore operations. Set it to Automatic and start it. Restart the computer after changing service settings before attempting System Restore again

Free up disk space

  • System Restore needs available disk space to create temporary files during the restore process. If the system drive is nearly full, the restore fails because it cannot create the working copies needed to swap files. Check free space on the C drive and ensure at least 5 to 10 GB is available
  • Run Disk Cleanup to free space: search for Disk Cleanup, select the C drive, click Clean Up System Files, and select all categories. Pay attention to Windows Update Cleanup and Previous Windows Installation which can free several gigabytes
  • Also check the disk space allocated to System Restore itself. Open System Properties (right-click This PC, Properties, System Protection), select the C drive, and click Configure. Check the current space usage and maximum size. If the allocation is too small, increase it. If it is using all allocated space with old restore points, click Delete to remove old points and free the space

Fix the 0x80070091 directory error

  • This error means a folder in the restore path is not empty and cannot be replaced. The most common culprit is the WindowsApps folder. Open File Explorer, navigate to C colon Program Files, and look for a folder named WindowsApps. If it exists and was recently modified, it may be blocking the restore
  • Rename the problematic folder by adding .old to the end of its name. You may need to take ownership of the folder first: right-click the folder, Properties, Security, Advanced, Change Owner to your account, then check the Replace All Child Object Permissions box. After renaming, try System Restore again
  • If you cannot identify which folder is causing the error, try a different restore point. The error may be specific to one restore point that captured a problematic folder state

Try a different restore point

  • The specific restore point you selected may be corrupted. In System Restore, check the box to Show More Restore Points to see all available points. Select a different restore point, preferably one created before the one that failed, and attempt the restore
  • Restore points created by Windows Update before installing updates are generally more reliable than automatic daily restore points. Look for restore points with descriptions mentioning specific updates or software installations
  • If all restore points fail, the System Restore component itself may be corrupted. Delete all existing restore points (System Properties, System Protection, Configure, Delete) and create a fresh one. Then repair the system using other methods before relying on System Restore for future use

Repair system files

  • Corrupted system files can prevent System Restore from completing. Open Command Prompt as Administrator and run sfc /scannow. If SFC finds corruption, it attempts to repair it. After repair, try System Restore again
  • If SFC cannot repair all files, run DISM /Online /Cleanup-Image /RestoreHealth first to repair the component store, then run SFC again. These tools restore damaged system components that may be causing System Restore failures
  • If you are in the recovery environment because Windows does not boot, use the offline versions: sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows and DISM /Image:C:\ /Cleanup-Image /RestoreHealth

Re-enable System Protection

  • If System Restore says no restore points are available or that System Protection is turned off, the feature may have been disabled. Open System Properties, System Protection tab. Select the C drive and click Configure. Select Turn On System Protection and set the disk space allocation to at least 5 percent of the drive
  • System Protection can be disabled by Windows updates, third-party optimization software, or group policies. If it keeps turning off, check whether any installed software (disk cleaners, optimization tools) is disabling it. Also check Group Policy: open gpedit.msc, navigate to Computer Configuration, Administrative Templates, System, System Restore, and ensure Turn Off System Restore is set to Not Configured or Disabled
  • After re-enabling System Protection, create a manual restore point immediately to verify the feature is working. Click Create in the System Protection tab, name the restore point, and confirm it creates successfully

Alternative recovery methods

  • If System Restore cannot be fixed, use Windows Reset as an alternative. Open Settings, System, Recovery, Reset This PC, Keep My Files. This reinstalls Windows while preserving personal files, achieving a similar result to System Restore but more thoroughly
  • If you have a recent backup from File History or a third-party backup tool, restore from the backup instead. Backup restoration is more reliable than System Restore because it works from a complete file copy rather than a shadow copy snapshot
  • An in-place Windows upgrade (downloading the Media Creation Tool from Microsoft and selecting Upgrade This PC) repairs Windows without losing files or applications. This fixes system corruption that prevents both System Restore and normal operation

Need help with System Restore?

If System Restore keeps failing and the troubleshooting steps above have not resolved the issue, Marion Remote Fix can remotely diagnose restore failures, repair system components, fix Volume Shadow Copy problems, and help recover your system using alternative methods.

← Back to Blog