How to Fix Print Spooler Errors on Windows
Published 2026-10-16 · Marion Remote Fix
You try to print a document and get an error about the print spooler, or the print job sits in the queue and never prints, or the printer says it is offline even though it is connected and powered on. The Print Spooler is a Windows service that manages all communication between your computer and printers. When the spooler crashes, freezes, or encounters an error, nothing prints from any application until the problem is resolved.
What the Print Spooler does
- The Print Spooler service receives print jobs from applications, stores them temporarily in a spool folder, and sends them to the printer in order. This allows you to continue working in the application immediately after clicking Print rather than waiting for the entire document to transfer to the printer
- The spooler handles job queuing (multiple documents waiting to print), job prioritization, and communication with the printer driver. If any part of this chain fails — a corrupted job file, a crashed driver, or a full spool folder — the entire spooler can stop functioning
- When the spooler crashes, it takes down printing for all printers and all applications on the computer. Symptoms include Print Failed errors, the printer showing as offline, print jobs disappearing from the queue, or the spooler service stopping immediately after being started
Restart the Print Spooler service
- The fastest fix for most spooler problems is restarting the service. Open the Services application (press the Windows key, type Services, press Enter). Scroll down to Print Spooler, right-click it, and select Restart
- If the Restart option is grayed out, the service has stopped. Right-click and select Start instead. If the service fails to start, note the error message — it indicates the underlying cause
- After restarting, try printing again. If printing works, the spooler was in a hung state and the restart cleared it. If the spooler stops again within minutes, there is a deeper problem causing it to crash
Clear stuck print jobs
- A corrupted or oversized print job in the queue can crash the spooler every time it tries to process that job. To clear the queue, first stop the Print Spooler service in the Services application
- With the spooler stopped, navigate to the spool folder. The default location is C colon Windows System32 spool PRINTERS. Delete all files inside the PRINTERS folder. These are the queued print jobs — deleting them clears the queue completely
- Start the Print Spooler service again. The queue is now empty and the spooler can start fresh. Try printing a new test document. If the spooler stays running and the document prints, a corrupted job in the queue was the cause
- If the same document consistently crashes the spooler when you try to print it, the document itself may have elements that the printer driver cannot process. Try printing it to a different printer or saving it as a PDF first and then printing the PDF
Fix the spooler service that will not start
- If the Print Spooler service refuses to start and shows an error like The Service Terminated Unexpectedly or Error 1068 The Dependency Service Failed, check the dependent services. The Print Spooler depends on the Remote Procedure Call (RPC) service. Open Services, find Remote Procedure Call, and ensure it is running and set to Automatic
- If the spooler starts but immediately stops, a corrupted printer driver is likely crashing it. Open the PRINTERS spool folder while the spooler is stopped and check for any leftover files. Then start the spooler and immediately try printing a test page from a basic printer like Microsoft Print to PDF. If that works, the problem is with a specific printer driver
- Check the Windows Event Viewer for spooler crash details. Open Event Viewer, navigate to Windows Logs, System, and look for errors from the Print Spooler source or Spoolsv. The error details often name the specific DLL (driver file) that caused the crash
Remove and reinstall problem printer drivers
- A corrupted or incompatible printer driver is the most common cause of persistent spooler crashes. When the spooler tries to load the driver to process a job, the driver crashes and takes the spooler down with it
- To remove a problem driver: open Print Management (search for it in the Start menu — available on Windows Pro editions). Expand Print Servers, then your computer name, then Drivers. Find the driver for the problem printer, right-click it, and select Remove Driver Package
- On Windows Home edition where Print Management is not available, open Settings, Bluetooth and Devices, Printers and Scanners. Select the problem printer and click Remove. Then open Device Manager, click View, Show Hidden Devices, expand Print Queues, and remove any leftover printer entries. Restart the computer
- After removing the driver, download the latest driver from the printer manufacturer website (not from Windows Update, as Windows may reinstall the same problematic version). Install the fresh driver and add the printer back
Run the printer troubleshooter
- Windows includes a built-in printer troubleshooter that can detect and fix common spooler and printer configuration problems. Open Settings, System, Troubleshoot, Other Troubleshooters. Find Printer and click Run
- The troubleshooter checks the spooler service status, driver integrity, printer connectivity, and queue health. It can automatically restart the spooler, clear stuck jobs, and fix some configuration errors. Follow any recommendations it provides
- The troubleshooter does not fix driver corruption — it primarily handles service and configuration issues. If the troubleshooter says no problems were found but the spooler still crashes, the driver needs manual replacement
Fix spooler crashes caused by third-party software
- Some third-party print management, document management, or security software installs print processor DLLs or print monitors that can crash the spooler. If the spooler started crashing after installing new software, that software may be the cause
- To test, stop the spooler, navigate to C colon Windows System32 spool prtprocs w32x86 (or x64) and note which print processor DLLs are present. The default is winprint.dll. Any other DLLs were installed by third-party software. Temporarily move non-default DLLs to a backup folder, start the spooler, and test. If the spooler stays running, one of those DLLs was the cause
- Similarly, check C colon Windows System32 spool monitors for non-default port monitor DLLs. Third-party virtual printers and fax software often install port monitors that can crash the spooler if the software is uninstalled improperly
Repair system files affecting the spooler
- Corrupted Windows system files can prevent the spooler from functioning. Open Command Prompt as administrator and run the System File Checker: type sfc followed by a space and /scannow and press Enter. This scans all protected system files and replaces corrupted ones from the Windows component store
- If SFC finds corruption it cannot repair, follow it with the DISM tool: type DISM /Online /Cleanup-Image /RestoreHealth and press Enter. This repairs the component store itself, after which you can run SFC again to fix the system files
- After running both tools, restart the computer and test the Print Spooler. If system file corruption was affecting the spooler DLLs or registry entries, they should now be restored to working copies
Registry fixes for persistent spooler problems
- If the spooler repeatedly crashes and no driver or service fix resolves it, check the spooler registry keys. Incorrect or corrupted registry entries for printer ports, monitors, or processors can cause crashes on every startup
- Open Registry Editor and navigate to the print key under HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows NT CurrentVersion Print. Under Monitors, Environments, and Processors, look for entries that reference third-party software that is no longer installed. Remove orphaned entries from uninstalled software
- Export a backup of the Print registry key before making any changes. If a registry edit causes additional problems, you can import the backup to restore the previous state
Set the spooler to recover automatically
- Configure the Print Spooler service to restart itself if it crashes. Open Services, double-click Print Spooler, and go to the Recovery tab. Set First Failure, Second Failure, and Subsequent Failures to Restart the Service. Set the reset fail count to 1 day
- This does not fix the root cause of crashes, but it minimizes the impact by automatically restarting the spooler within seconds of a crash. For intermittent driver issues that cause occasional crashes, automatic recovery keeps printing functional without manual intervention
Need help with print spooler errors?
If your print spooler keeps crashing or refusing to start and the troubleshooting steps above have not resolved the issue, Marion Remote Fix can remotely diagnose spooler problems, remove corrupted drivers, clear stuck print jobs, repair system files, and restore reliable printing on your computer.