How to Fix Network Discovery When It Keeps Turning Off on Windows

Published 2026-10-16 · Marion Remote Fix

You open File Explorer and look for other computers on your network but the network folder is empty. Or you try to access a shared folder and get an error saying the network path was not found. Windows tells you that Network Discovery is turned off, and even after you turn it on, it turns itself back off. Network Discovery is the Windows feature that lets your computer find other devices on the local network and lets other devices find yours. When it is off, network sharing does not work.

What Network Discovery does

  • Network Discovery controls whether your computer can see other computers, printers, and devices on the local network, and whether those devices can see your computer. When it is on, you can browse shared folders, connect to network printers, and use other local network services
  • Network Discovery uses several network protocols to find devices: SMB (Server Message Block) for file sharing, SSDP (Simple Service Discovery Protocol) for device discovery, and WS-Discovery for newer devices. All of these must be working for full network visibility
  • Windows disables Network Discovery by default on networks classified as Public to protect your computer in untrusted environments like coffee shops and airports. On networks classified as Private (your home or office network), Network Discovery should be enabled by default

Change your network profile to Private

  • If your network is classified as Public, Windows keeps Network Discovery off as a security measure. Changing it to Private enables Network Discovery and file sharing
  • On Windows 11, open Settings, Network and Internet, then click your network connection (Wi-Fi or Ethernet). Under Network Profile Type, select Private Network. On Windows 10, open Settings, Network and Internet, click Properties under your connection, and select Private
  • A Private network profile tells Windows this is a trusted network where you want to share files and discover other devices. Only set networks you trust to Private — never set a public Wi-Fi hotspot to Private
  • After switching to Private, Network Discovery should enable automatically. If it does not, proceed to the manual enable steps below

Enable Network Discovery manually

  • Open Control Panel, Network and Sharing Center, then click Change Advanced Sharing Settings on the left side. Expand the Private section (or the section that shows as your current profile)
  • Under Network Discovery, select Turn On Network Discovery. Also check the box for Turn On Automatic Setup of Network Connected Devices if it appears
  • Under File and Printer Sharing, select Turn On File and Printer Sharing. Network Discovery without file sharing enabled gives limited functionality
  • Click Save Changes. If Network Discovery turns back off immediately or after a short time, one of the required services is not running (covered below)

Start the required Windows services

  • Network Discovery depends on several Windows services. If any of these services are stopped or disabled, Network Discovery will not stay on even after you enable it manually
  • Open the Services application (search for Services in the Start menu). Find and check each of these services:
  • DNS Client — resolves network names. Should be set to Automatic and Running
  • Function Discovery Resource Publication — publishes your computer on the network so other devices can find it. Should be set to Automatic (or Manual) and Running
  • SSDP Discovery — discovers devices using the SSDP protocol. Should be set to Manual and Running (or Automatic)
  • UPnP Device Host — allows UPnP devices to be hosted on your computer. Should be set to Manual and Running
  • Function Discovery Provider Host — provides function discovery providers. Should be set to Manual
  • If any of these services are set to Disabled, change the startup type and start the service. Third-party optimization or security tools sometimes disable these services to reduce the attack surface, which breaks Network Discovery

Check the Windows Firewall

  • Windows Firewall has specific rules that allow Network Discovery traffic. If these rules are disabled or blocked, Network Discovery cannot communicate with other devices even when the feature is enabled in settings
  • Open Windows Defender Firewall with Advanced Security (search for it in the Start menu). Click Inbound Rules in the left panel. Find the rules named Network Discovery and check that they are enabled (green checkmark) for your network profile (Private or Domain)
  • If the Network Discovery rules are disabled, right-click each one and select Enable Rule. The rules include several entries for different protocols (UDP, TCP) on different ports
  • If you use a third-party firewall instead of Windows Firewall, check its settings for Network Discovery or local network access rules. The firewall must allow traffic on UDP ports 1900 and 3702, and TCP port 5357 for Network Discovery to function

Enable SMB for file sharing

  • SMB (Server Message Block) is the protocol Windows uses for file and printer sharing. If SMB is disabled, you cannot access shared folders on other computers even if Network Discovery finds them
  • Open Control Panel, Programs, Turn Windows Features On or Off. Find SMB 1.0/CIFS File Sharing Support and SMB Direct. For most home networks, SMB Direct should be enabled. SMB 1.0 is an older version that may be needed to connect to older devices (NAS drives, older Windows computers) but has security vulnerabilities
  • Only enable SMB 1.0 if you specifically need to connect to a device that does not support newer SMB versions. For connections between modern Windows computers (Windows 10 and 11), SMB 2 and 3 are used automatically and SMB 1.0 is not needed
  • After enabling or disabling SMB features, restart the computer for the changes to take effect

Network Discovery on Windows 11

  • Windows 11 changed some aspects of network browsing. The old Computer Browser service was removed and replaced with WS-Discovery based browsing. This means older discovery methods may not work on Windows 11
  • If Windows 11 computers cannot see Windows 10 or older computers on the network (or vice versa), the issue may be protocol compatibility. Enabling Function Discovery Resource Publication on all computers helps bridge this gap
  • Windows 11 also removed the HomeGroup feature that previously simplified home network sharing. File sharing now works through standard network sharing settings without HomeGroup

Group Policy restrictions

  • On corporate computers or computers where Group Policy has been modified, Network Discovery may be disabled by policy. If the Network Discovery toggle in settings is grayed out, a policy is preventing you from changing it
  • On Windows Pro editions, open the Group Policy Editor (gpedit.msc). Navigate to Computer Configuration, Administrative Templates, Network, Link-Layer Topology Discovery. Check that the policies are set to Not Configured or Enabled for the network type you need
  • Also check Computer Configuration, Administrative Templates, Network, Network Connections, Windows Firewall. There are policies specifically for allowing Network Discovery exceptions through the firewall

Cannot see specific computers

  • If Network Discovery is on and you can see some computers but not others, the missing computers may have their own Network Discovery disabled. Check the sharing settings on the computer you are trying to find
  • Name resolution can also prevent discovery. If a computer appears intermittently or cannot be accessed by name, try accessing it by IP address instead. If the IP address works but the name does not, the issue is name resolution (DNS or NetBIOS) rather than discovery
  • Computers on different subnets (different IP ranges) cannot discover each other through standard Network Discovery. All devices must be on the same local network segment for browsing to work

Need help with Network Discovery?

If Network Discovery keeps turning off or you cannot see other computers on your network despite enabling sharing settings, Marion Remote Fix can remotely configure your network sharing, start required services, adjust firewall rules, and troubleshoot device visibility issues on your Windows computer.

← Back to Blog