How to Fix Microphone Echo and Audio Feedback on Your Computer

Published 2026-10-16 · Marion Remote Fix

People on your call hear their own voice echoed back to them. Or you hear a repeating echo of yourself. Or there is a high-pitched squealing feedback noise during calls and recordings. Microphone echo and feedback occur when audio from your speakers is picked up by your microphone and sent back to the other participants. The sound goes in a loop — speaker to microphone to speaker — creating an echo or, when amplified enough, a piercing feedback squeal.

Why echo happens

  • When you are on a voice or video call, the other person voice comes out of your speakers. If your microphone picks up that speaker output, it sends the audio back to the other person, who then hears their own voice with a slight delay. This is echo
  • Echo cancellation is built into most conferencing software and audio drivers. It works by recognizing the audio being played through the speakers and subtracting it from the microphone input. When echo cancellation fails or is not active, the full speaker output bleeds into the microphone
  • Feedback is an extreme version of echo. It happens when the microphone gain is high enough and the speakers are loud enough that the loop amplifies itself. Each cycle through the loop gets louder until it produces the characteristic high-pitched squeal
  • Laptops with built-in speakers and microphones are especially prone to echo because the microphone and speakers are physically close to each other. External speakers placed near an external microphone create the same problem

Use headphones

  • The single most effective fix for echo is using headphones or earbuds. When audio plays through headphones instead of speakers, the microphone cannot pick up the sound because it is contained in the headphones rather than broadcast into the room
  • Any headphones work — wired earbuds, over-ear headphones, wireless Bluetooth earbuds, or a USB headset with a built-in microphone. Even basic earbuds eliminate echo completely because the speaker output never reaches the room microphone
  • If you must use speakers (for group meetings where multiple people share a room, for example), use a speakerphone device designed for conferencing. These devices have built-in echo cancellation hardware that is far more effective than software echo cancellation

Check microphone settings

Disable Listen to This Device

  • Windows has a setting that plays your microphone input through your speakers in real-time. This is called Listen to This Device and it creates an immediate echo loop
  • Open the Sound control panel (right-click the speaker icon in the taskbar, select Sounds). Go to the Recording tab, double-click your microphone, and go to the Listen tab. Uncheck Listen to This Device if it is checked. Click Apply
  • This setting is rarely needed for normal use. It is primarily used for monitoring microphone input during audio production, but if it gets enabled accidentally, it creates constant echo during calls

Reduce microphone sensitivity

  • A microphone set to high sensitivity or high gain picks up more ambient sound, including speaker output from across the room. Reducing the microphone level decreases the amount of speaker bleed the microphone captures
  • In the Sound control panel on the Recording tab, double-click your microphone and go to the Levels tab. Reduce the Microphone level (try 70-80% instead of 100%) and set Microphone Boost to 0 dB or +10 dB maximum. Higher boost amplifies all sound including echo-causing speaker output
  • After reducing the level, test with the other person on a call. You want the microphone sensitive enough that they can hear you clearly but not so sensitive that it picks up audio from across the room

Enable echo cancellation

Windows audio enhancements

  • Some Windows audio drivers include an echo cancellation or acoustic echo cancellation enhancement. In the Sound control panel, Recording tab, double-click your microphone, and check the Enhancements tab or Advanced tab for an echo cancellation option
  • Not all audio drivers offer this feature. Realtek drivers sometimes include it, but many generic and USB audio drivers do not. If the option is not present, the echo cancellation must come from the conferencing application instead

Application echo cancellation

  • Most video conferencing applications (Zoom, Microsoft Teams, Google Meet, Discord) have their own echo cancellation built in. Check the audio settings within the application
  • In Zoom, go to Settings, Audio, and check Suppress Background Noise (set to Auto or High). Zoom also has echo cancellation that activates automatically when it detects echo
  • In Microsoft Teams, audio processing including echo cancellation is automatic. If echo persists in Teams, check that you have the correct microphone and speaker selected in Teams audio settings — selecting the wrong devices can bypass the echo cancellation
  • In Discord, go to Voice and Video settings. Enable Echo Cancellation and Noise Suppression. Discord uses Krisp-based noise processing that handles echo well in most situations

Speaker and microphone placement

  • If you use external speakers and a separate microphone, their physical positioning matters. Point the microphone away from the speakers. Place speakers behind or to the side of the microphone rather than directly in front of it
  • Reduce speaker volume. The louder the speakers, the more sound reaches the microphone. Keeping speaker volume at a moderate level reduces echo even without any software processing
  • Directional microphones (cardioid pattern) pick up sound primarily from the front and reject sound from the sides and rear. If your microphone has a directional mode, use it and aim the rejection side toward the speakers
  • USB conferencing microphones designed for calls often have better built-in echo cancellation than generic microphones. If echo is a persistent problem, a dedicated conferencing microphone can be a worthwhile upgrade

Multiple audio devices causing loops

  • If multiple audio input or output devices are active simultaneously, audio can route through unexpected paths creating echo. For example, if both a headset microphone and the laptop built-in microphone are active, the built-in microphone may pick up speaker audio while the headset microphone captures your voice
  • Check that only one microphone is active. In the Sound control panel, Recording tab, right-click microphones you are not using and select Disable. Leave only the microphone you intend to use enabled
  • Similarly, verify only one playback device is active if you are experiencing echo. If audio plays through both external speakers and a headset simultaneously, the speaker audio reaches any active microphone
  • In the conferencing application audio settings, explicitly select the correct microphone and speaker rather than using the system default. This prevents the application from using an unintended device

Bluetooth headset echo

  • Bluetooth headsets can cause echo when they switch between audio profiles. The A2DP profile provides high-quality stereo audio but does not support a microphone. The HFP (Hands-Free Profile) provides both microphone and speaker but at much lower audio quality
  • When a call starts, Windows switches the Bluetooth headset from A2DP to HFP. During this transition, audio may briefly play through the laptop speakers before switching to the headset, and the microphone may pick up that brief speaker output
  • If echo occurs only at the start of calls with a Bluetooth headset, this transition is the cause. Manually selecting the headset as both the input and output device in the conferencing application before starting the call can reduce the transition delay

Echo in recordings

  • If you are recording audio (not on a call) and hear echo in the recording, the microphone is picking up audio from the speakers during playback. This is the same speaker-to-microphone loop but captured in a recording instead of sent to another person
  • When recording, use headphones to monitor playback rather than speakers. This prevents the playback audio from reaching the microphone
  • If you must record with speakers active (such as recording a narration over a video playing on screen), reduce speaker volume to the minimum you can still hear and increase the distance between the speakers and microphone

Need help fixing echo or feedback?

If microphone echo or feedback persists during your calls and meetings and the adjustments above have not solved it, Marion Remote Fix can remotely configure your audio devices, adjust microphone and speaker settings, set up proper echo cancellation in your conferencing applications, and resolve audio routing issues that cause feedback loops.

← Back to Blog