How to Control Computer Fan Speed Through BIOS and Software

Published 2026-10-16 · Marion Remote Fix

Your computer fans run at full speed constantly, making the machine distractingly loud. Or the fans barely spin and the computer overheats. Or the fans ramp up aggressively at the slightest load and then drop back to idle, creating an annoying cycle. Fan speed control lets you balance cooling performance against noise. The right settings keep your computer cool enough to avoid thermal throttling while keeping fan noise at an acceptable level for your environment.

How fan speed control works

  • Computer fans are controlled by temperature-responsive speed curves. As the CPU or GPU temperature rises, the fans spin faster to increase airflow. As temperatures drop, fans slow down. This relationship between temperature and fan speed is called the fan curve
  • The fan curve determines how aggressive the cooling response is. A steep curve means fans ramp up quickly at low temperatures — cooler but louder. A gentle curve means fans stay quiet longer but temperatures run higher before cooling catches up
  • Fan speed is typically controlled by PWM (Pulse Width Modulation) signals on 4-pin fan headers. The motherboard sends a PWM signal that tells the fan what percentage of its maximum speed to run at. 3-pin fans are controlled by voltage regulation instead, which is less precise

BIOS fan control

Accessing fan settings

  • Enter the BIOS or UEFI setup by pressing the key shown during startup (typically Del, F2, F10, or F12 depending on the motherboard manufacturer)
  • Fan control settings are usually found under Hardware Monitor, Hardware Health, Fan Configuration, or a similarly named section. Some BIOS interfaces have a dedicated fan control tab

Common BIOS fan modes

  • Silent mode: Fans stay at low speed until temperatures reach a higher threshold. This prioritizes quiet operation at the cost of slightly higher idle and light-load temperatures. Good for office and general use
  • Standard or Normal mode: The default balanced profile. Fans respond moderately to temperature changes. A reasonable middle ground between noise and cooling
  • Performance or Full Speed mode: Fans run at higher speeds and respond more aggressively to temperature increases. Louder but provides maximum cooling. Useful for sustained heavy workloads
  • Custom or Manual mode: Allows you to set your own fan curve by specifying temperature points and corresponding fan speeds. This gives you the most control but requires understanding what temperatures are safe for your components

Setting a custom fan curve in BIOS

  • A custom fan curve defines several temperature and speed pairs. For example: at 30 degrees Celsius set fans to 30%, at 50 degrees set 50%, at 70 degrees set 80%, at 85 degrees set 100%
  • A good starting point for a quiet custom curve is to keep fans at their minimum speed (usually 20-30%) below 50 degrees, gradually ramp to 60-70% between 50 and 75 degrees, and go to full speed above 80 degrees
  • Never set fans to 0% at any temperature. If the fan stops completely and the CPU runs a background task, temperatures can spike quickly before the fan has time to spin up. Keep a minimum speed of 20-30% to maintain baseline airflow
  • After setting a custom curve, monitor temperatures during typical use for the first few days to verify the system stays within safe ranges. CPU temperatures under 85 degrees during heavy load are generally acceptable for modern processors

Software fan control

SpeedFan

  • SpeedFan is a free Windows utility that reads temperature sensors and allows manual fan speed control. It supports most motherboards and can create automatic fan speed profiles based on temperature readings
  • SpeedFan requires some configuration to match your specific hardware. It needs to detect your fan controllers and temperature sensors correctly before you can adjust speeds. The automatic configuration usually works but may need manual adjustment
  • SpeedFan can run at Windows startup and apply your fan settings automatically, replacing the BIOS fan control with more granular software control

Manufacturer software

  • ASUS Fan Xpert (in AI Suite or Armoury Crate): Provides graphical fan curve editing with drag-and-drop temperature and speed points. Includes a fan tuning wizard that tests each fan and optimizes the curve automatically
  • MSI Dragon Center or MSI Center: Includes fan speed control with preset profiles and custom curve editing. The Game Mode profile ramps fans aggressively; Silent Mode keeps them low
  • Gigabyte System Information Viewer or Gigabyte Control Center: Fan curve control under the Smart Fan section. Supports both CPU and system fan headers
  • ASRock A-Tuning: Similar fan curve control for ASRock motherboards

Argus Monitor and FanControl

  • Argus Monitor is a third-party monitoring tool with advanced fan control. It supports controlling fans based on any temperature source (CPU, GPU, SSD, motherboard) and can create complex conditional fan profiles
  • FanControl is a free open-source fan control tool that supports a wide range of hardware. It provides a graphical interface for creating fan curves and supports temperature source mixing (basing fan speed on the highest of multiple temperature readings)

GPU fan control

  • Graphics card fans are controlled separately from the system fans. GPU fans are managed by the GPU BIOS and driver, not the motherboard
  • NVIDIA and AMD driver software does not provide direct fan curve editing by default. For NVIDIA, the GeForce Experience software does not include fan control. For AMD, the Adrenalin software includes a fan tuning section under Performance, Tuning
  • Third-party GPU tools provide more control: MSI Afterburner (works with all GPU brands despite the MSI name) offers detailed fan curve editing with temperature and speed graph points. EVGA Precision and Gigabyte AORUS Engine provide similar control for their respective brands
  • MSI Afterburner is the most popular choice because it works regardless of GPU manufacturer and provides a clear graphical fan curve editor. Set it to start with Windows and apply the fan profile at startup

Laptop fan control

  • Laptop fan control is more limited than desktop fan control because laptop manufacturers use proprietary fan controllers that are not always compatible with third-party software
  • Most laptop manufacturers provide their own software for fan control: Lenovo Vantage (Thermal Mode), Dell Power Manager, HP Command Center, ASUS MyASUS (Fan Profile). These typically offer preset modes (quiet, balanced, performance) rather than custom curves
  • Some laptops respond to SpeedFan or NoteBook FanControl (NBFC), a specialized open-source tool designed for laptop fan control. NBFC includes configuration profiles for many laptop models. Check the NBFC compatibility list for your specific model
  • Be cautious with laptop fan control. Laptops have tight thermal margins, and reducing fan speed too aggressively can cause thermal throttling or even thermal shutdowns. Laptop cooling solutions are designed with specific airflow paths that depend on the fans running at expected speeds

When fans should always run fast

  • During sustained heavy workloads (gaming, video rendering, compiling code), fans should run at high speed. Limiting fan speed during these tasks causes thermal throttling, which reduces performance
  • In a hot environment (room temperature above 30 degrees Celsius or 86 Fahrenheit), fan curves should be shifted more aggressive than in a cool room. The same fan speed provides less cooling when the ambient air is warmer
  • If your computer has limited airflow (a small case, blocked vents, dusty filters), prioritize cooling over quiet. Clean the dust first, but if airflow is inherently restricted, faster fan speeds compensate

Troubleshooting fan control issues

  • If fans always run at full speed regardless of temperature, the temperature sensor may be reporting incorrect values. Check temperatures in the BIOS or with a monitoring tool. If the BIOS shows high temperatures even at idle, the thermal paste between the CPU and cooler may need replacing
  • If fans do not respond to speed changes in software, the fans may be connected to a fan header that does not support PWM control (a 3-pin header instead of a 4-pin), or the BIOS may be overriding the software settings. Check the BIOS fan control mode — some BIOS settings take priority over software control
  • If a fan makes grinding, clicking, or rattling noises at any speed, the fan bearing is failing. No amount of speed control fixes a bad bearing — the fan needs replacement

Need help with fan noise or cooling?

If your computer fans are too loud, not cooling effectively, or you need help configuring fan curves for the right balance of performance and quiet, Marion Remote Fix can remotely access your BIOS and software fan settings, configure custom fan curves, and diagnose cooling problems that may need physical attention.

← Back to Blog