How to Fix Email That Will Not Send from Your Computer

Published 2026-10-16 · Marion Remote Fix

You click Send but the email sits in your Outbox, shows an error, or appears to send but never arrives at the recipient. Outgoing email failures are one of the most common computer problems and the cause is usually a settings issue, an authentication problem, or a blocked connection rather than a broken email account. This guide covers every common reason email will not send and how to fix each one.

Check your internet connection first

Email requires an active internet connection to send. This sounds obvious but is worth confirming because some email clients let you compose and click Send while offline — the message queues in the Outbox and waits:

  • Open a web browser and load any website. If the page loads, your internet connection is working
  • If you are on Wi-Fi and the page does not load, try disconnecting and reconnecting to Wi-Fi, or switch to a wired connection if available
  • If your internet is working but email still will not send, the problem is with email settings or your email server, not your connection

Check the Outbox

When an email fails to send, it usually gets stuck in the Outbox folder rather than moving to Sent:

  • Outlook: Click the Outbox folder in the left panel. If the stuck email is there, double-click it to open it. Check for any obvious issues — a very large attachment, an invalid email address in the To field (missing @ sign, extra spaces, special characters). Fix the issue, then click Send again. If the email is stuck and will not open, right-click it and select Delete, then compose a new message
  • Apple Mail: Click the Outbox in the sidebar (it may appear under the Mailboxes section only when there are stuck messages). Open the stuck email, verify the recipient address, and try sending again
  • Thunderbird: Check the Outbox under Local Folders. Right-click the stuck message and select Edit As New to create a fresh copy, then delete the stuck original and send the new one

Verify outgoing server (SMTP) settings

Outgoing email uses SMTP (Simple Mail Transfer Protocol). If these settings are wrong, email can be received but not sent:

  • Outlook (Microsoft 365 / Outlook.com): SMTP server: smtp.office365.com. Port: 587. Encryption: STARTTLS. Authentication: your full email address and password
  • Gmail: SMTP server: smtp.gmail.com. Port: 587 (STARTTLS) or 465 (SSL). Authentication: your Gmail address and an App Password (not your regular Google password if you have two-factor authentication enabled)
  • Yahoo Mail: SMTP server: smtp.mail.yahoo.com. Port: 465 (SSL). Authentication: your Yahoo email and an App Password
  • iCloud Mail: SMTP server: smtp.mail.me.com. Port: 587 (STARTTLS). Authentication: your Apple ID email and an app-specific password from appleid.apple.com
  • To check these settings in your email client: Outlook desktop: File, Account Settings, Account Settings, double-click your account. Thunderbird: Account Settings, Outgoing Server (SMTP). Apple Mail: Mail menu, Settings, Accounts, select the account, Server Settings tab

Authentication and app passwords

Most email providers now require either OAuth authentication or app-specific passwords rather than your regular login password:

  • Gmail and Google Workspace: If you have two-factor authentication enabled (which Google strongly encourages and may require), you cannot use your regular password in third-party email clients. Go to myaccount.google.com, Security, App Passwords. Generate a new app password for Mail and use that in your email client settings instead of your regular Google password
  • Microsoft 365 / Outlook.com: Modern authentication (OAuth2) is required. In Outlook desktop, if you are prompted for your password repeatedly, your authentication may be stuck on an old method. Remove the account from Outlook and re-add it. The re-add process will use modern authentication and prompt you to sign in through a browser window
  • Yahoo: App passwords are required for third-party clients. Go to Yahoo Account Security, select Generate App Password, choose the app type, and use the generated password in your email client
  • iCloud: If you have two-factor authentication enabled (required for newer Apple IDs), generate an app-specific password at appleid.apple.com under Sign-In and Security, App-Specific Passwords

Attachment size limits

If the email has an attachment, the file size may exceed the server limit:

  • Most email providers have a maximum attachment size: Gmail allows 25 MB, Outlook.com allows 20 MB, Yahoo allows 25 MB. These limits apply to the total message size including all attachments
  • Files are encoded for email transmission using Base64, which increases the file size by about 33 percent. So a 20 MB file becomes about 27 MB after encoding, which exceeds the 25 MB Gmail limit. In practice, keep individual attachments under 15 to 18 MB to stay within limits after encoding
  • If your attachment is too large, the email may fail silently (sits in Outbox with no error) or may show a bounce-back error about message size. Use a file sharing service (Google Drive, OneDrive, Dropbox) and send a link instead

Check if your account is blocked or suspended

  • If you sent a large number of emails in a short period, your email provider may have temporarily blocked outgoing mail to prevent spam. Gmail limits personal accounts to about 500 emails per day. Outlook.com limits vary. This block usually lifts automatically after 24 hours
  • Check for a notification email from your provider about unusual activity or a temporary block. Also sign in to your email through the web browser (gmail.com, outlook.com) and try sending from there. If web sending works but the desktop client does not, the problem is with the client settings, not the account
  • If your account was compromised and used to send spam, the provider may have suspended outgoing mail. You will usually see a notification or security alert when signing in through the web. Follow the provider recovery process to restore access

Firewall and antivirus interference

  • Some firewalls and antivirus programs block outgoing connections on port 25, 465, or 587 (the ports email uses to send). This is especially common with corporate or school network firewalls
  • Temporarily disable your firewall or antivirus as a test. If email sends successfully with them off, the security software is blocking the SMTP connection. Re-enable the security software and add an exception for your email client (Outlook, Thunderbird) or for the SMTP ports (587 and 465)
  • If you are on a corporate or public Wi-Fi network that blocks SMTP ports, try using port 465 with SSL instead of port 587 (or vice versa). Some networks block one but not the other. Alternatively, use your email provider web interface to send, which uses HTTPS (port 443) and is almost never blocked

Corrupted email profile (Outlook)

Outlook stores email account settings in a profile that can become corrupted, causing send failures even when all settings are correct:

  • Repair the profile: In Outlook, go to File, Account Settings, Account Settings. Select your account and click Repair. Follow the prompts. Outlook will re-verify the account settings and fix common issues
  • Create a new profile: If repair does not help, open Control Panel, search for Mail, click Mail, then Show Profiles. Click Add to create a new profile with the same email account. Set it as the default. This starts with a clean configuration. Your emails are stored on the server (for IMAP and Exchange accounts) and will re-download in the new profile
  • Run the Office repair tool: Go to Control Panel, Programs and Features, select Microsoft Office, click Change, then select Online Repair. This reinstalls Office components including the email transport libraries

DNS and network issues

  • Your computer needs to resolve the SMTP server hostname to an IP address. If DNS is not working, the email client cannot connect to the outgoing server even though your internet otherwise works
  • Test DNS: Open Command Prompt and type nslookup smtp.gmail.com (replace with your SMTP server). If it returns an IP address, DNS is working. If it times out or fails, your DNS server may be down
  • Switch to a public DNS server: Open Network Settings, change your DNS server to 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare). This bypasses any issues with your ISP or router DNS

Bounce-back and error messages

If you receive a bounce-back email (also called a Non-Delivery Report or NDR), it contains specific information about why the email was not delivered:

  • 550 Mailbox not found / User unknown: The recipient email address does not exist. Double-check the spelling
  • 552 Message size exceeds limit: The email with attachments is too large. Reduce the attachment size
  • 554 Message rejected / Spam detected: The recipient server rejected your email as spam. This can happen if your email content triggers spam filters, or if your email server IP is on a blocklist. Try sending a plain-text email without links or attachments as a test
  • 421 Too many connections / Try again later: The recipient server is temporarily overloaded. Wait 30 minutes and resend
  • 535 Authentication failed: Your username or password is wrong. Re-enter your credentials in the email client settings

Still cannot send email?

If you have verified your SMTP settings, updated your password or app password, checked your internet and firewall, and emails still will not send, Marion Remote Fix can connect to your computer remotely and diagnose the exact cause — whether it is a client configuration issue, a network block, a corrupted profile, or a server-side problem with your email provider.

← Back to Blog