Understanding and Fixing Disk Check Errors on Your Computer

Published 2026-10-16 · Marion Remote Fix

Your computer runs a disk check at startup — a blue or black screen with text scrolling by, sometimes taking minutes to complete. Or Windows shows a notification that errors were found on a drive. Or an application reports that it cannot read or write a file because of a disk error. Disk errors range from minor file system inconsistencies that are easily repaired to signs of a drive that is physically failing and needs replacement. Understanding what the errors mean helps you respond appropriately — fixing what can be fixed and backing up before a failing drive takes your data with it.

What causes disk errors

Improper shutdown

  • The most common cause of minor disk errors is an improper shutdown — a power outage, holding the power button, or the computer crashing while files were being written
  • When the operating system is writing data and power is lost, the file system can be left in an inconsistent state. The file system journal (which tracks in-progress writes) may not match the actual data on disk. These inconsistencies show up as errors on the next startup
  • These errors are usually harmless and are repaired automatically by the disk check process. They do not indicate a hardware problem

File system corruption

  • Software bugs, driver errors, or malware can corrupt the file system metadata — the data structures that track where files are stored on the disk, which sectors are in use, and how files are organized
  • Corrupted metadata can cause files to appear to be in the wrong location, directories to contain incorrect entries, or free space accounting to be wrong
  • File system corruption is usually repairable with CHKDSK (Check Disk) on Windows. The repair process rebuilds the damaged metadata from the data that is still on the disk

Failing drive hardware

  • Physical problems with the drive — bad sectors on an HDD, failing NAND cells on an SSD, a degrading drive controller, or connector problems — produce persistent disk errors that reappear after repair
  • If CHKDSK finds and marks bad sectors, and the number of bad sectors keeps growing over time, the drive is physically failing. This is a progressive condition — it gets worse, not better
  • Drives that take increasingly long to read or write, produce clicking or grinding sounds (HDDs), or cause the system to freeze during disk access are showing hardware failure symptoms beyond simple file system errors

Understanding CHKDSK

CHKDSK (Check Disk) is the Windows built-in tool for finding and repairing disk errors.

How it runs

  • Automatic startup check: Windows schedules a disk check if it detects the file system was not cleanly unmounted (typically after a crash or power loss). The check runs during the next startup before Windows fully loads. You see text-mode output showing the check progress
  • Manual check: You can run CHKDSK manually from an elevated Command Prompt by typing chkdsk followed by the drive letter. Running chkdsk C: checks the C drive. Adding the /f flag tells it to fix errors. Adding /r tells it to locate bad sectors and recover readable information
  • From File Explorer: Right-click a drive in File Explorer, select Properties, then the Tools tab, then Check under Error Checking. This provides a graphical interface to the same CHKDSK process

CHKDSK stages

  • Stage 1: Verifies files — checks the file record segments in the Master File Table (MFT) for consistency
  • Stage 2: Verifies indexes — checks directory structures and file names for consistency
  • Stage 3: Verifies security descriptors — checks file permission metadata
  • Stage 4 (only with /r flag): Reads every sector on the disk to find bad sectors. This stage takes the longest because it must physically read the entire drive surface. On a large HDD, this can take hours
  • Stage 5 (only with /r on some versions): Verifies free clusters on the drive

Common CHKDSK messages

  • Windows has made corrections to the file system: Minor inconsistencies were found and repaired. Usually harmless and caused by an improper shutdown. No action needed beyond monitoring for recurrence
  • Replacing bad clusters in file: Physical bad sectors were found on an HDD. The data from those sectors was moved to good sectors and the bad sectors were marked so they will not be used again. If this message appears once, it may be an isolated incident. If it appears repeatedly or the bad sector count grows, the drive is failing
  • Correcting errors in the master file table: The MFT (the critical data structure that maps all files on an NTFS drive) had errors. This is more serious than simple file corruption. If MFT errors persist, consider replacing the drive
  • Insufficient disk space to fix the log file: The drive is too full for CHKDSK to work properly. Free up space and run the check again

When disk errors indicate drive failure

  • Growing bad sector count: A few bad sectors on an older HDD can be normal. A rapidly increasing count (check SMART data with tools like CrystalDiskInfo or the drive manufacturer diagnostic tool) indicates accelerating physical degradation
  • Recurring errors after repair: If CHKDSK reports and fixes errors, and the same or similar errors appear within days or weeks, the drive is developing new problems faster than they can be repaired
  • SMART warnings: SMART (Self-Monitoring, Analysis, and Reporting Technology) is built into every modern drive. It tracks internal health metrics. Tools like CrystalDiskInfo read these metrics and display an overall health status. A Caution or Bad status is a direct indication of hardware problems
  • Performance degradation: A drive that has become noticeably slower — taking longer to open files, longer to boot, longer to copy data — may be developing bad sectors that cause the drive to repeatedly retry reads

SSD-specific disk errors

  • SSDs do not have moving parts and do not develop bad sectors the same way HDDs do. Instead, NAND flash cells wear out after a finite number of write cycles
  • SSD controllers transparently remap worn cells to spare cells. When the spare cell pool is depleted, the drive begins losing capacity and eventually fails
  • SSD SMART data includes metrics specific to flash health: percentage of life used, available spare blocks, and total data written. Monitoring these values with CrystalDiskInfo shows the remaining useful life of the drive
  • An SSD reporting errors in CHKDSK may have a firmware issue, a connection problem, or may be reaching end of life. SSD failure tends to be more sudden than HDD failure — the drive either works or it does not, with less gradual degradation warning

What to do when you see disk errors

  • Back up immediately: If your drive is showing errors, especially recurring ones, your first priority is ensuring your data is backed up to another drive or cloud storage. Do not wait to see if the problem gets worse
  • Run CHKDSK: Open Command Prompt as administrator and run chkdsk with the /f flag on the affected drive. If the drive is your system drive (usually C), CHKDSK will schedule the check for the next restart
  • Check SMART health: Install CrystalDiskInfo (free) and check the drive health status. Look specifically at Reallocated Sectors Count, Current Pending Sector Count, and Uncorrectable Sector Count for HDDs. Look at Percentage Used and Available Spare for SSDs
  • Monitor after repair: If CHKDSK fixes the errors, monitor the drive over the following weeks. If errors return, the drive needs replacement. If the errors do not return, the issue was likely caused by an improper shutdown and the drive is fine

Preventing disk errors

  • Use a UPS (uninterruptible power supply) for desktop computers to prevent power-loss corruption during outages
  • Always shut down Windows properly through the Start menu rather than holding the power button or unplugging the computer
  • Keep some free space on your drives — a nearly full drive is more susceptible to file system issues and gives CHKDSK less room to work with during repairs
  • Replace drives proactively when SMART monitoring shows declining health rather than waiting for complete failure

Need help with disk errors?

If your computer is showing persistent disk errors, CHKDSK is not resolving the problem, or you suspect your drive is failing and need help backing up data before it is too late, Marion Remote Fix can remotely check your drive health, run diagnostics, and advise whether the drive needs repair or replacement.

← Back to Blog