Understanding BIOS Updates and When to Apply Them

Published 2026-10-16 · Marion Remote Fix

A BIOS update is one of the few computer maintenance tasks that carries real risk if done incorrectly. Unlike software updates that can be rolled back, a failed BIOS update can leave your computer unable to start. At the same time, BIOS updates are sometimes the only fix for hardware compatibility issues, security vulnerabilities, or system stability problems. Understanding what the BIOS does, when updates actually matter, and how the process works helps you make an informed decision about whether to update and how to do it safely.

What the BIOS does

BIOS stands for Basic Input/Output System. On modern computers, it is technically called UEFI (Unified Extensible Firmware Interface), though most people still use the term BIOS. It is the first software that runs when you turn on your computer.

  • Hardware initialization: The BIOS tests and initializes your CPU, RAM, storage drives, graphics card, and other hardware components before the operating system loads. This process is called POST (Power-On Self-Test)
  • Boot management: The BIOS determines which storage device to boot from and hands control to the operating system bootloader
  • Hardware configuration: The BIOS stores settings for hardware operation — CPU clock speeds, memory timings, fan curves, boot order, and security features like Secure Boot and TPM
  • Firmware layer: The BIOS sits between the hardware and the operating system. It provides a standardized interface that allows the operating system to communicate with hardware without needing to know the exact specifications of every component

When you should update the BIOS

The general guidance is conservative: if your computer is working properly, there is usually no urgent reason to update the BIOS. But several situations specifically call for an update.

Update when

  • You are installing a new CPU: When a motherboard manufacturer releases BIOS updates to support new processor models, the update is mandatory for the new CPU to work. If you install a CPU that the current BIOS does not recognize, the computer will not boot. Check the motherboard manufacturer CPU support list to see which BIOS version is required for your processor
  • You are experiencing a known BIOS bug: Motherboard manufacturers release BIOS updates to fix specific issues — USB ports not working correctly, sleep and wake problems, memory compatibility issues, fan speed errors, or boot failures with certain hardware configurations. If the BIOS release notes specifically mention a fix for a problem you are experiencing, the update is worth applying
  • Security vulnerability patched: BIOS-level security vulnerabilities are serious because they operate below the operating system and can survive OS reinstalls. When a security patch is released for a vulnerability that affects your system, applying it promptly is advisable. These are occasionally flagged by Windows Update or security advisories
  • New hardware is not recognized: A new RAM kit, NVMe drive, or GPU that should be compatible but is not working may need a BIOS update for proper support. Check the motherboard manufacturer release notes for hardware compatibility updates
  • Windows 11 requirements: Some older systems needed BIOS updates to properly enable TPM 2.0 and Secure Boot for Windows 11 compatibility

Skip when

  • Your computer is working normally and you are not planning hardware changes. Updating a functioning BIOS introduces risk without clear benefit
  • The BIOS release notes only mention changes that do not affect your hardware configuration. An update that adds support for a CPU you do not own and will not buy provides no value
  • You are running a stable system for critical work and cannot afford downtime if something goes wrong during the update

How modern BIOS updates work

Finding your current BIOS version

  • Windows: Open System Information (type msinfo32 in the Start menu search). The BIOS Version/Date field shows your current version and when it was released
  • During startup: The BIOS version is usually displayed briefly on the POST screen when the computer first turns on, before the operating system begins loading
  • In BIOS setup: Enter the BIOS setup utility (typically by pressing Delete, F2, or F12 during startup — the correct key varies by manufacturer) and look for version information on the main page

Downloading the update

  • Always download BIOS updates from the motherboard or computer manufacturer official website. Navigate to the support page for your specific model and find the BIOS or firmware download section
  • Verify you are downloading the correct BIOS for your exact motherboard model. Motherboard model numbers can be very similar (for example, a B550M and B550M-A are different boards with different BIOS files). Installing the wrong BIOS can brick the board
  • Read the release notes. They list what changes the update includes and may have specific instructions or warnings for the update process

The update process

Modern BIOS updates are considerably simpler and safer than they were a decade ago. Most current motherboards support one or more of these methods:

  • BIOS utility update: Copy the downloaded BIOS file to a USB flash drive formatted as FAT32. Enter the BIOS setup utility and use the built-in update tool (called EZ Flash on ASUS, M-Flash on MSI, Q-Flash on Gigabyte, and BIOS Update on ASRock). The utility reads the file from the USB drive and applies the update
  • Windows-based update: Some manufacturers provide a Windows utility that applies the BIOS update from within the operating system. The computer restarts into a special mode to complete the process. This is the most convenient method but relies on Windows being stable
  • USB BIOS Flashback: Higher-end motherboards include a button on the rear IO panel that allows BIOS updates without a CPU, RAM, or graphics card installed. You place the BIOS file on a USB drive, plug it into a designated USB port, and press the button. This is primarily useful for updating the BIOS to support a new CPU before the CPU is installed

Risks and precautions

  • Power interruption: The most serious risk during a BIOS update is losing power while the update is being written. This can corrupt the BIOS chip and leave the computer unable to start. Use a stable power source — ideally a UPS (uninterruptible power supply) for desktop computers. For laptops, ensure the battery is charged and the power adapter is connected
  • Do not interrupt the process: Once the BIOS update begins, do not turn off the computer, press buttons, or remove the USB drive until the update completes and the system restarts on its own. The process typically takes two to five minutes
  • Settings reset: BIOS updates typically reset all BIOS settings to defaults. If you have customized settings (XMP memory profiles, fan curves, boot order, virtualization settings), note them before updating so you can restore them afterward
  • Recovery options: Many modern motherboards have dual BIOS chips or BIOS recovery modes that can restore a working BIOS if an update fails. Check your motherboard documentation to see what recovery options are available before updating

After the update

  • The computer will restart after the update completes. It may restart more than once — this is normal as the new BIOS initializes
  • Enter the BIOS setup to verify the new version is installed and to restore any customized settings that were reset to defaults
  • Re-enable XMP or DOCP for your RAM if you were using it — BIOS updates reset memory to default speeds, which may be significantly slower than the rated speed of your RAM
  • Verify that all storage drives, boot entries, and hardware are recognized correctly
  • If the computer does not boot after the update, try clearing the CMOS (there is usually a button or jumper on the motherboard) to reset BIOS settings completely. If that does not help, the BIOS recovery method for your motherboard may be needed

Laptop and pre-built BIOS updates

  • Laptop and pre-built computer BIOS updates come from the computer manufacturer (Dell, HP, Lenovo, ASUS, etc.) rather than the motherboard chipset maker. Check the support page for your specific computer model
  • Many laptop manufacturers deliver BIOS updates through their system update utilities (Dell SupportAssist, Lenovo Vantage, HP Support Assistant). These tools check for and install BIOS updates alongside driver updates
  • Windows Update occasionally delivers BIOS updates for supported systems. These are applied during a restart and are typically well-tested for the specific hardware configuration

Need help with a BIOS update?

If you are unsure whether a BIOS update is needed, concerned about the update process, or dealing with a computer that is not booting correctly after a BIOS update attempt, Marion Remote Fix can remotely guide you through the process, verify your current BIOS version, and help you determine whether an update is the right solution for your issue.

← Back to Blog