How to Fix a Printer Showing Offline in Windows

Published 2026-10-14 · Marion Remote Fix

Windows says your printer is offline but the printer is physically turned on and appears to be connected. Print jobs sit in the queue with an Offline status and nothing prints. The printer offline issue in Windows is usually a communication breakdown between the computer and the printer — not a printer hardware problem. Windows loses track of the printer for many reasons: the print spooler gets stuck, the printer's IP address changes on the network, a driver update breaks communication, or a power management setting disconnects the USB printer.

Restart the printer and computer

The universal first step — it fixes most temporary communication issues:

  1. Turn the printer completely off using the power button. Unplug the printer's power cable for 30 seconds to force a full hardware reset
  2. While the printer is off, restart your computer
  3. Plug the printer back in and turn it on. Wait 30 to 60 seconds for it to fully initialize (network printers need time to reconnect to Wi-Fi or get a DHCP address)
  4. Try printing a test page. This restart sequence clears the vast majority of temporary offline issues

Uncheck Use Printer Offline

Windows has a manual offline mode that can get toggled accidentally or by the system:

  1. Open Settings, Bluetooth and Devices, Printers and Scanners (Windows 11) or Settings, Devices, Printers and Scanners (Windows 10)
  2. Click your printer, then Open Print Queue
  3. In the print queue window, click the Printer menu at the top of the window
  4. If Use Printer Offline has a checkmark next to it, click it to uncheck. This tells Windows to go back online and start processing print jobs
  5. If there are stuck print jobs in the queue, right-click each one and select Cancel. Then try printing a fresh test page

Clear the print spooler

The Windows Print Spooler service manages print jobs. When it gets stuck (usually from a corrupted print job), all printing stops and the printer appears offline:

  1. Press Windows+R, type services.msc, press Enter
  2. Find Print Spooler in the list. Right-click, select Stop
  3. Open File Explorer and navigate to C:\Windows\System32\spool\PRINTERS
  4. Delete all files in this folder. These are stuck print jobs. You may need to confirm an administrator prompt
  5. Go back to Services, right-click Print Spooler, select Start
  6. The printer should come back online. Try printing again

Fix USB printer going offline

USB printers frequently go offline because of Windows USB power management:

Disable USB selective suspend

  1. Open Control Panel, Power Options
  2. Click Change Plan Settings next to your active power plan
  3. Click Change Advanced Power Settings
  4. Expand USB Settings, USB Selective Suspend Setting
  5. Set both On Battery and Plugged In to Disabled
  6. Click Apply and OK

Disable USB power management per device

  1. Open Device Manager (right-click Start, Device Manager)
  2. Expand Universal Serial Bus Controllers
  3. Right-click each USB Root Hub and USB Host Controller, select Properties
  4. Go to the Power Management tab
  5. Uncheck Allow the computer to turn off this device to save power
  6. Repeat for all USB Root Hubs and controllers. This prevents Windows from disconnecting the USB printer to save power

USB cable and port

Fix network printer going offline

Check network connection

Fix IP address mismatch

This is the most common cause of network printers going offline. The printer's IP address changes (common with DHCP) but Windows still tries to reach it at the old address:

  1. Open Control Panel, Devices and Printers
  2. Right-click the printer, select Printer Properties (not just Properties)
  3. Go to the Ports tab
  4. Find the checked port and note the IP address. Compare it to the printer's current IP (from the network configuration page you printed earlier)
  5. If they do not match: click Configure Port and update the IP address. Or Add Port, Standard TCP/IP Port, and enter the current IP
  6. To prevent this permanently: assign a static IP to the printer. Either set it on the printer itself (in the printer's network settings menu) or configure a DHCP reservation on your router (the router always assigns the same IP to the printer's MAC address)

Reinstall the printer

If the printer keeps going offline regardless of other fixes:

  1. Settings, Printers and Scanners — click your printer, click Remove Device
  2. Restart the computer
  3. Download the latest driver from the printer manufacturer (HP, Canon, Epson, Brother) — search for your exact model number
  4. Install the driver and follow the setup wizard. For network printers, the wizard usually finds the printer automatically. For USB printers, connect the cable when prompted

Manufacturer diagnostic tools

Windows Troubleshooter

  1. Settings, System, Troubleshoot, Other Troubleshooters
  2. Run the Printer troubleshooter. It checks the spooler service, driver configuration, port settings, and network connectivity
  3. Follow any recommended fixes it suggests

Update printer driver

Check Windows Firewall

For network printers, a firewall can block printer communication:

Printer offline repair in Marion

If your printer keeps showing offline in Windows and the troubleshooting above did not fix it, Marion Remote Fix can remotely diagnose the printer connection, fix driver and spooler issues, configure static IP addressing for network printers, and resolve USB power management problems that cause the printer to disconnect.